Skip to product information
1 of 14

Preference Floors

De Marque Oak Chevron

De Marque Oak Chevron

De Marque Oak Chevron is a pre-finished engineered oak parquetry from Preference Floors, designed to make a strong design statement without the time, mess, or compromise of traditional site-finished parquetry. Each block is engineered from a solid European Oak wear layer bonded to a multi-ply hardwood substrate, with angled, mitred ends that meet at a perfect V to create the chevron's distinctive sharp, directional pattern across the floor.

The chevron range is offered in 14 colours spanning soft warm naturals like Pure Natural and Cannes, considered greys like Chateau Grey, Colonial Grey, and Storm, richer warm tones in Cognac, Latte, and Champagne, and contemporary darker tones in Mink Grey, Dark Brown, Vintage, Parana, Riesling, and Sauvignon. All colours are pre-finished with a low-VOC water-based matte coating and lightly wire-brushed for a soft, tactile surface that reads as natural rather than glossy.

Each block measures 600 x 120mm in the 15/4mm format (with a 4mm wear layer) and 600 x 90mm in the thicker 21/6mm format (with a 6mm wear layer). Eleven of the fourteen colours are available in the 15mm format, six in the 21mm format, and three (Dark Brown, Latte, and Parana) are offered in both thicknesses. The thicker 21/6mm wear layer suits higher-traffic installations and homes that may want to sand and refinish the floor decades down the line.

De Marque Chevron is installed by direct adhesive fix only on a flat, dry substrate, and is suitable for residential, multi-residential, and light commercial applications. The product is backed by a 25-year limited structural warranty, a 20-year residential wear warranty, and a 5-year commercial wear warranty.

Available for supply and install across the Sunshine Coast. Visit our Warana showroom or book a free measure and quote.

Details

Range: De Marque Oak Parquetry Chevron
Construction: Engineered multi-ply hardwood with European Oak wear layer
Block Size: 600 x 120mm (15/4mm format) / 600 x 90mm (21/6mm format)
Thickness Options: 15/4mm and 21/6mm depending on colour. Dark Brown, Latte, and Parana available in both thicknesses.
Profile: Universal T&G with micro-bevel on 4 sides
Grade: ABC Grade (contains knots and split defects, filled and patched)
Janka Hardness: 5.5 to 6.0 kN
Surface Finish: Pre-finished, matte PU coating, light wire brush
VOC Emissions: E1 (low VOC water-based coating)
Fire Test: AS/ISO 9239.1 Critical Radiant Flux 7.5 kW/m2 or greater
Slip Resistance: P3 (AS/NZS 4586:2013)
Installation: Direct adhesive fix only, on flat dry substrate
Heating Compatibility: Hydronic in-slab heating only
Suitability: Residential, multi-residential, and light commercial
Warranties: 25-year limited structural / 20-year residential wear / 5-year commercial wear
T&G Stair Nosing: Available to match

Performance

Engineered multi-ply hardwood with 4mm or 6mm solid European Oak wear layer
Pre-finished matte PU coating with light wire brush
Suitable for residential, multi-residential, and light commercial
Janka Hardness 5.5 to 6.0 kN
Universal T&G profile with micro-bevel on 4 sides
Set 600 x 120mm block size (15/4mm) / 600 x 90mm (21/6mm)
Two thickness options on selected colours (15/4mm and 21/6mm)
Australian Fire and Slip test certified (P3 slip rating)
Compatible with hydronic in-slab heating
T&G stair nosing available to match
25-year structural / 20-year residential wear / 5-year commercial wear warranty

Sustainability

Engineered construction uses up to two-thirds less premium oak than equivalent solid timber flooring
Long-life pre-finished surface and refinishable wear layer reduce replacement cycles
Low-VOC water-based matte coating (E1 emissions rating)
Multi-ply hardwood substrate provides dimensional stability and longevity

View full details

You May Also Like